Features:
This is a DC-AC inverter transform module that could convert voltage from DC 12V to AC 110V 220V.

The module adopts high quality PCB board, durable for use.
Output waveform type is frequency square wave.
High power from 50W to 150W, when power is over 100W, it is recommended to add heat sink for heat dissipation.

Mainly used for electronic DIY work before the inverter stage.

Specifications:
Power: 50W-150W
Input Voltage: DC 12V
Quiescent Current: About 0.05A
Output Wave: Frequency square wave
Output Frequency: About 20kHz
Size: 3*10cm/1.18*3.93in

Note:
1. The board is high frequency square wave AC output so it can not drive general inductive electric appliances, such as electromotor, electric fan, coil transformer, etc.
2. When connected with small load(LED light, phone charger, etc.), please connect to the gear of low output voltage: 172V or 200V.
3. When work for a long time under large load, suggest to enhance heat dissipation.
4. Don't connect the power reversely, and the power supply and power cable should be with enough large current.
5. Don't overload or short circuit the output.
6. High frequency output low voltage measured by multimeter will display higher(it's not correct, not the actual voltage).

The default output voltage wiring as follows(for reference only):
V0 - V2 = 110V  V0 - V3 = 175V
V0 - V4 = 200V  V0 - V5 = 220V
V5 - V4 = 20V    V5 - V3 = 45V
V5 - V2 = 110V  V4 - V3 = 28V
V4-V2 = 90V      V3-V2 = 62V

Package Includes:
1 x Inverter Module