Specifications:
Material: Stainless steel 
Drive Mode: electrodynamic
Voltage: DC 12V, /24V (optional)
Current: 1.8A( 12V), 0.8A (24V)
Motor Racing Current: 0.2A (12V), 0.1A (24V)
Pump Running Current Largest: 1.5A (12V), 0.8A (24V)
Power: 40W
Flow Rate: 12L/min
Outer Diameter: 38mm / 1.5in
Oil Out Diameter: 16mm / 0.6in
Pump Lift: 2m / 79in
Motor Racing Speed: 8500r/min
Wire Length: 3m / 118in
Packing: Carton
Package Size: 16*8.5*5.2cm / 6.3*3.3*2in
Packege Weight: 327g / 11.5oz

Method Of Application: 
1.Take a good self-contain oil hose, and then the pump completely into the clean oil (or water) .
2.Put 12V/24V plug in a car battery or a cigarette lighter rather. 
3.The red click is to connect positive pole, the black click is to connect negative pole.
4.The pump after use, should put the oil from the oil (or water out) 

Notes:
1.Diesel pump operated by DC 12V/24V motor, full sealed device.
2.The motor is insulated to the shell.
3.When it works, first should put clean diesel pump in the middle of diesel bucket, does not allow empty load operation.
4.Pay attention to the load capacity of bucket when the pump is running,do not exceed load capacity line.
5.The pump is strictly prohibited pumping gasoline, alcohol and other flammable liquids.
6.The oil outlet hose is self-provided .
7.This product is mainly composed of diesel, pumping, continuous work after 50 minutes, must cooling oil pump before use.
8.Don't make change the anode and cathode of battery clamp.
9. The pump need to be completely submerged in the liquid when it is used.

Package List:
1 * Pump