These luminaires are used indoors (ta 40 C) where emergency light is needed. Each luminaire must be permanently connected to mains power supply. In normal operation the led strip lights and the battery is charging. In case of a mains power supply failure the luminaire will light the led strip automatically in emergency mode. When the mains power supply is restored the device turns to normal operation. — After installation, a 24 hours charging cycle must be completed, in order to achieve the nominal autonomy. — During commissioning of the luminaire write the commissioning date on the battery. — When power is applied to the unit inspect that the CHARGE indicator is steady, and that the led lamp is lit (maintained operation) or OFF (non-maintained operation) — A full duration test should be conducted after 24 hours of continuous charging. The test is initiated by isolating the mains power supply. Verify that the LED lamp is lit during the test period for at least the stated duration